Welcome to the official website of Linyi Rongxin Enamel Co., Ltd.!
Production matters of plastic spray color basin
At present, most of the production of spray-painted color basins use machinery and equipment, which greatly improves work efficiency. However, even the best machines must pay attention to problems.
First, according to the size of the work, you can use gun tips of different sizes and calibers. Due to different types of paint, its specific gravity is different. If the specific gravity is large, the wind pressure can be increased, but the wind pressure must not exceed the strength of the electromagnetic field. When spraying, it should also be noted that the distance between the suspended workpiece and the ground must be more than 1 meter, and the distance between the workpiece and the workpiece should not collide with each other, the smaller the distance, the better. In addition, you must pay attention to the operation. The operator must wear electrified shoes and fully clean the soles of the shoes. At the same time, the conductive objects in the coating room of the coating equipment must be grounded.
After producing the plastic spray color basin, be sure to clean it, regularly or regularly remove the paint residue on the spray gun, and keep it clean.
What is the difference between enamel and enamel?
A composite material that is coated with one or several layers of enamel on the surface of the metal,and after firing,the two undergo a physical and chemical reaction to bond firmly.
- The historical development of enamel 07-01
- Pigment sintering process in enamel manufacturing 07-01
- Requirements for glazes in the production of enamel 07-01
- Production matters of plastic spray color basin 07-01